Interface Overview

Get known of the physical interfaces on the WiFi extender.

Interfaces

EZR14T WiFi extender has a waterproof enclosure with 2x WiFi antenna sockets and 1x PoE gland. The WiFi antenna sockets are N-female connectors on the top side. The PoE socket is on the downside.

Enclosure

The waterproof enclosure is diecast from anti-corrosion ADC12 aluminum by 100-ton pressure. It's passed a bundle of rugged tests for long-period outdoor operation, such as the Salt Spray Test, Leakage Test, IP67 Waterproof Test, etc.

The electronic design abides by industrial outdoor standards with surge protection and withstands extreme temperatures.

Open the Enclosure Use the hexagon head on the T-wrench to lose bolts in the anti-clockwise direction.

Seal the Enclosure Close the lid & press with your hand. Ensure no gap after closing. Use the T-wrench to tighten all bolts in the clockwise direction.

Indicators

There are six working indicators on the motherboard of the WiFi extender.

The image below shows Wi-Fi, System, Internet, Power, WAN, and LAN indicators on the bottom side of the motherboard. Check the chart below about the indicator status and related performance.

Indicator	Status	Description
Power	Green	Turns on when connected to PoE or DC power source.
System	Green	This light indicates that the router is in operation. If it lit solid green, then the router has booted successfully.
	Flash	The router system is booting up. The system indicator flashes while resetting or flashing the firmware.
	Off	Short of power. Check the PoE or DC power connection.
Wi-Fi	Green	Wi-Fi hotspot is enabled. You can find and connect to the Wi-Fi hotspot if the light is green.
	Flash	If you are connected to the Wi-Fi hotspot, it will flash green to indicate data going to and from the router. If the router is connected to another Wi-Fi hotspot (Wi-Fi relay), it will also flash because it has the data flow.
	Off	If it's off, your router no longer sends a Wi-Fi signal. You can log in to the router admin and turn on the Wi-Fi hotspot.
Internet	Green	Indicates the extender has a workable internet connection.
	Flash	Means internet is activated with data flow.
	Off	No workable internet.
WAN LAN	Green	WAN (or LAN) connection is activated.
	Flash	WAN (or LAN) interface has data flow.
	Off	No activated connection on WAN (LAN) interface.